192.168.1.1 Login

192.168.1.1 Login

The 192.168.1.1 or 192.168.0.1 login refers to the access to the Netgear’s router’s web setup interface through this IP address. This IP address is predefined to navigate the user to the web setup page. It is this setup page only through which the user can get their devices set up.  There is a custom web address of routerlogin.net through which the user can also access the router’s setup interface easily.

Netgear router setup

The Netgear router setup basically includes several crucial steps. First and the foremost is the initial hardware connection installation. This hardware connection, in turn, includes the connection of the computer and the modem device to the router devices through one of the below-mentioned means.

1.      WPS connection

2.      Ethernet cable connection

3.      Connection over wifi

WPS connection

Lest we get to the WPS connection first by explaining this super cool and very helpful method of getting your hardware connected to each other. Below is the step by step described procedure for the same.

• Unpack your Netgear routing device and connect it to a power supply source.

• Now, push the WPS button on the router and then push the WPS button on the modem as well. Both the networking hardware will be connected to each other in a blink of an eye.

•  Now that you need to get your computer device connected to your Netgear router, you will just need to select the WPS connection tab in the Network & Internet settings section.

• Once you have selected the WPS connection on your computer device, it will automatically get connected to the router device.

Once this initial setup is completed, move on to the configuration part through www.routerlogin.net or through the IP 192.168.1.1 or 192.168.0.1.

Upon establishing a secure and reliable hardware interconnection between all the devices, what you need to do is just follow again the setup processes below.

• Open the latest and updated web browser on your computer system and enter the web link of routerlogin.net and authorize the login with a username and password.

• The default login username and password is “admin” and “password”.

• The home page of your Netgear wireless router will be displayed now, select the WAN settings internet tabs and then select the appropriate connection type from the drop-down list of connection types available.

• The PPPoE connection type will work best for internet connection usage. Enter the username and password provided by your internet service providers.

• Save all the changes and click reboot now tab to get all the settings written in the router memory. 

 

What do you need to know?

Some important hacks regarding your Netgear router setup are listed below.

• Always try to use their custom web link of routerlogin.net for accessing the login admin page of the router.

• Also, the initial hardware interconnection between the modem, router and the computer should be wired (through Ethernet cables) as the wired connection is more reliable and secure.

• Make sure that the reboot of the router device takes place properly without any interference as such.